This device requires no flame for ignition and emits no smoke has a simple on / off switch and uses Infra-red emitting on a similar wavelength to burning moxa. It can also be used through clothing or directly on to skin.
Easy to use moxa device supplied with a stand and two separate heads / probes, one offering more heat than the other and both heads are adjustable to provide more or less heat depending on the sensitivity of the patient. A small stand is supplied so that the therapist does not need to hold the device during the treatment.
Optimum skin temperature: 40oC – 45 oC at room temperature (An advisable distance from the heater to surface of the skin)
Input voltage: 100 – 240 VAC, 0.6 A, 50 – 60 Hz
Output voltage: 24 VDC 1.04 A
Electrical Power: 20W
Timer: 10 min, 20 min
Buzzer: Will sound and stop to work automatically when the set time is up.
Off-On switch: Power on, power off
Green LED indicates unit is switched on.
Yellow LED indicates heat function is on.
1. Temperature control thermostat within temperature 40oC – 45 oC (at room temperature)
2. Thermal cut off Fuse 2A 102oC (inside heater)
3. Current fuse: 2A 125V (inside unit)
Device L 155mm x H 130mm x W 85mm
Probe Diameter 28mm x L 130mm (not including heater)
Heater Diameter 25mm x L 60mm (not including safety shield)
Plug in switching Power supply L 84mm x W 56mm x H 37.9mm
Device (including heater and stand) 510gms
Device accessory, plug in switching power supply 240gms
10 oC – 35 oC (50 oF – 95 oF) RH 35 75 % – 1060 hPa